Hunting Energy Services

Maintenance Manager

LocationMilford, TX
Job TypeFull-time

About This Job

Manages the Maintenance Department and coordinates with management and production supervisors the activities of the maintenance technicians engaged in the daily routines of maintaining the company’s manufacturing equipment, as well as the buildings and grounds. Performs various mechanical job duties in relation to repairing, replacing, installing, and/or moving equipment. Must correspond with all departments involved in any maintenance needs. At all times, must comply with safety and quality policies and procedures and notify management when they become aware of non-conformances. Work will be performed in an explosives manufacturing environment (i.e., Class 2, Div 1explosives). This position requires on-site presence and regular attendance to perform the essential duties.



Responsibilities:

Manages maintenance department and assists with the hiring, training and supervision of Maintenance Technicians.
Identifies training needs; develops and implements plans to obtain necessary competencies within the maintenance department.
Develops processes, systems, and controlled procedures to provide control and clear direction and expectations to the maintenance team.
Audits processes to identify risks and opportunities for improvement; implement improvements in a controlled manner through Hunting requirements.
Develops and outlines a program for continuous improvement for the maintenance department, including a PM program.
Responsible for tracking and monitoring facility utilities and implementing energy savings initiatives.
Acts and performs as an interface between maintenance, manufacturing, contractors and engineering.
Assists in the specification of production equipment and the selection, purchase and installation into the facility.
Manages and oversees capital projects.
Performs various mechanical job duties related to repairing, replacing, installing, and/or moving equipment.
Monitors contractor safety performance and, when assigned, coordinates contractor activities.
Evaluates long-term needs in relation to major projects and property improvements and reports suggestions to upper management.
Abides by and enforces the company’s policies for all maintenance employees.
Supports and encourages the maintenance employees to maintain department morale and develop strong and positive work relationships.
Utilizes the maintenance CMMS (computerized maintenance management system) to generate and track preventative maintenance schedules, repairs, equipment modifications, and new installation work orders, thus building an easily accessible equipment history maintained in the CMMS and hard copy. These records will be regularly audited and must be consistent.
Ensures that all jobs are processed and examined fully after repairs, replacements, and installations.
Promptly responds to equipment failures, troubleshoots, repairs, and prove in order to return equipment to service.
Document problems, troubleshooting techniques, repair procedures, and results in order to educate fellow maintenance employees should the circumstance repeat.
Completes all applicable paperwork for the department as necessary.
Works closely with purchasing agents to track and accrue the repair parts and supplies needed to maintain the facility.
Scopes repair work orders forthe time and materials needed to complete the tasks.
Provides general maintenance of buildings and grounds.
A continuing effort to gain knowledge in the trades necessary to execute prompt and reliable service to increase the efficiency of the maintenance department.
Other duties as assigned


Work Environment / Conditions:

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Due to the nature of the work, the employee regularly works near moving mechanical parts and is sometimes at risk of electrical shock while troubleshooting a piece of equipment. Once the problem has been diagnosed all energy sources to the machine are to be locked out and tagged out according company policies before repairs are attempted. The employee occasionally works in high, precarious places and in outside weather conditions/hot or cold, occasionally exposed to wet and/or humid conditions. There could be areas where the employee could be exposed to fumes, airborne particles and vibration. The noise level in the work environment is usually moderate. The employee frequently works with or around explosives. This involves handling packaged/boxed explosives as well as instructing customers in the proper use, storage, and transportation of these explosives. While rare, any accident could be catastrophic and potentially result in injury or death to many employees. The employee frequently works with powders, sometimes in a dusty environment and occasionally around fumes. Workers must not be overly sensitive (allergies, rashes, etc.) to working in these conditions.


Physical Demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is frequently required to stand, reach with hands and arms; and talk or hear. The employees occasionally required to walk; sit; climb or balance; and stool, kneel, crouch or crawl. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities that are required by this job include: close vision, color vision, depth perception, and the ability to adjust focus. These vision requirements relate to obtaining a valid driver’s license and recognizing current Hazmat warning labels or markings that are color coded.


JOB REQUIREMENTS:


A. Education and Training

High school diploma or the equivalent is required.
Bachelor’s degree in Electrical or Mechanical Engineering, or equivalent work
Ten (10) years maintenance.
Five (5) years of management experience.


B. General Requirements

Passionate about safety for self and others in the company.
Able to self-motivate, multi-task, and work independently.
Strong leadership skills andthe ability to manage strong personalities.
Able to work with and communicate with all management team members, production workers, and technicians, as well as both technical and non-technical personnel.
Able to schedule and lead effective team meetings as necessary.
Experience in planning and scheduling work priorities, materials, and available man-hours.
Excellent problem-solving ability.
Strong “hands-on” mechanical aptitude and ability.
Able to utilize time wisely to complete tasks.
Provides adequate response time for requests.
Maintains clear written records of activities.
Maintains a clean work area that is neat and professional looking.
Experience with a CMMS (computerized maintenance management system), writing, programming PM schedules to generate in a timely manner, general work orders, parts inventory, employee data, vendor information, account codes, equipment codes, generate equipment cost reports (parts and labor), general computer data entry in order to document repair task procedure history.


C. Technical Requirements / Skills

Able to provide service and repair to the equipment, buildings and grounds as required.
Automation maintenance experience.
Strong understanding of electronics.
Strong background in programming and troubleshooting latter logic-based controls.
Strong background in robotics.
History of managing maintenance inventory.
Must be experienced and proficient in all following areas.
+ Welding, cutting, brazing, HVAC, Pneumatic Equipment, Hydraulic power systems, electrical wiring up to 480 volt, and Computer-controlled mechanical systems.
Able to operate and maintain heavy equipment (backhoe, crane, sky-lift, forklift, )
Able to read blueprints and schematics.
Strong understanding of hydraulic, pneumatic, mechanical, and electrical systems, Programmable Logic Controllers (PLC), manufacturing processes, and materials.
Finds and utilizes contractors for work beyond normal abilities at the facility.
Takes initiative to learn and increase knowledge of mechanical equipment.


D. Certificates, Licenses & Registrations

Must have a valid driver’s license and record that conforms to the company’s insurance policies, ATF, DOT, and State or other required Hazmat training.

Must meet Hunting Titan/OSHA fork truck driver license requirements.


Work Authorization / Security Clearance:

Able to meet ATF & regulatory security requirements.
Must be a US citizen, or a lawful permanent resident of the United States (a student Visa does not qualify), in accordance with ATF regulations.


Experience


Required

10 year(s): Maintenance Experience


Education


Preferred

Bachelors or better in Electrical Engineering or related field

Equal Opportunity Employer

This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Similar Jobs

company-logo

Maintenance Manager

ESCO Group LLC
Job Typefull_time
 
Newton, MS
9 days ago
AS

Maintenance Manager

Atlantic Sintered
Job TypeFull-time
 
Wrentham, MA
15 days ago
company-logo

Maintenance Manager

Sibelco Group
Job Typefull_time
 
Delavan, WI
17 days ago
company-logo

Maintenance Manager

Can Art Aluminum Extrusion Canada Inc.
Job TypeFull-time
 
Windsor, ON
19 days ago
company-logo

Maintenance Manager

M&M Manufacturing
Job TypeFull-time
 
Fort Worth, TX
22 days ago
company-logo

Maintenance Manager

Eagle Creek Renewable Energy
Job TypeFull-time
 
Livermore Falls, ME
22 days ago
company-logo

Maintenance Manager

Apache Corporation
Job Typefull_time
 
Midland, TX
26 days ago
company-logo

Maintenance Manager

Engie
Job TypeFull-time
Salary
$113900 - $174570
Columbus, OH
27 days ago
company-logo

Maintenance Manager

Niron Magnetics
Salary
$105000 - $135000
Minneapolis, MN
27 days ago
company-logo

Maintenance Manager

Hunting Energy Services
Job TypeFull-time
 
Milford, TX
30 days ago
company-logo

Maintenance Manager

Drax
Job TypeFull-time
 
Demopolis, AL
about 1 month ago
company-logo

Maintenance Manager

Drax Group
Job TypeFull-time
 
Demopolis, AL
about 1 month ago
company-logo

Operations and Maintenance Manager

Capital Power
Job TypeFull-time
Salary
$125010 - $144456
Frederickson, WA
22 days ago
company-logo

Operations Maintenance Manager

Calpine
Job Typefull_time
 
Pine Bluff, AR
27 days ago
company-logo

Industrial Maintenance Manager

Atlas Energy Solutions
 
Kermit, TX
9 days ago
company-logo

Operations & Maintenance Manager

EthosEnergy
Job Typefull_time
 
La Porte, TX
16 days ago
company-logo

Operations & Maintenance Manager

CenTrio
Job Typefull_time
 
Denver, CO
20 days ago
company-logo

Manufacturing Maintenance Manager

GE Vernova
Job TypeFull-time
Salary
$90400 - $110000
Bangor, ME
19 days ago
company-logo

Manufacturing Maintenance Manager

Larsen Manufacturing
Job TypeFull-time
 
Mundelein, IL
21 days ago
company-logo

Manager of Maintenance and Engineering

U.S. Pipe
 
Bessemer, AL
30 days ago

Trending Jobs

company-logo

Foundry Professionals

Penticton Foundry
Job TypeFull-time
 
British Columbia, Canada
about 1 month ago
company-logo

Deckhand

Ballard Marine Construction
Job TypeFull-time
 
Bradenton, FL
about 1 month ago
company-logo

HSE Operations Manager

ProPetro Services, Inc
Job Typefull_time
 
Midland, TX
19 days ago
company-logo

Apprentice Lineman

N Line Electric
Job TypeFull-time
Salary
$68640 - $106080
Longmont, CO
30 days ago
company-logo

Lineman, Apprentice

Imperial Irrigation District
Job TypeFull-time
Salary
$82706 - $95679
Imperial, CA
about 1 month ago
company-logo

EAST VALLEY NIGHT BILINGUAL JANITORIAL UNIT MANAGER( MESA,CASA GRANDE, GILBERT)

ENVIRONMENT CONTROL
Job TypeFull-time
Salary
$41600 - $47840
Mesa, AZ
about 1 month ago
company-logo

Inventory Materials Specialist

HF Sinclair
Job Typefull_time
 
Artesia, NM
12 days ago
WO

Field Service Technician

Westar Oilfield Rentals Inc
Job TypeFull-time
 
Fort St. John, BC
26 days ago
company-logo

Manager, IT - BMO

Constellation
Job Typefull_time
 
Kennett Square, PA
26 days ago
company-logo

LCL66 Apprentice Lineman Distribution

CenterPoint Energy
Job TypeFull-time
 
Houston, TX
about 1 month ago
company-logo

Heavy Truck Driver

Halliburton
Job TypeFull-time
 
Bossier City, LA
about 1 month ago
company-logo

Accounts Payable Clerk

Drax
Job TypeFull-time
 
Monroe, LA
about 1 month ago
company-logo

Quality Inspector

ACCIONA
Job Typefull_time
 
British Columbia, Canada
26 days ago
company-logo

Quality Plus Store Associate

Quality Oil Company LLC
Job TypePart-time, Full-time
 
Halifax, VA
30 days ago
S

Electrical Lineman

Smarthire
Job TypeFull-time
Salary
$62400 - $72800
Austin, TX
about 1 month ago
company-logo

Electrician (Residential Solar)

Freedom Forever
Job TypeFull-time
 
Tucson, AZ
about 1 month ago
company-logo

HVAC Sales Comfort Advisor

Quality Degree, Inc.
Job TypeFull-time
Salary
$64924 - $200000
Royersford, PA
about 1 month ago
company-logo

NIGHT BILINGUAL JANITORIAL SUPERVISOR(SOUTH EAST VALLEY)

ENVIRONMENT CONTROL
Job TypeFull-time
Salary
$41600 - $47840
Gilbert, AZ
about 1 month ago
company-logo

Mechanic Class B (Day Shift)

Hydro
Salary
$66560 - $66560
Industry, CA
24 days ago
AW

Water Well Driller

Able Well Drilling
Job TypeFull-time
Salary
$45760 - $83200
Bowling Green, OH
about 1 month ago

Notice: The inclusion of job postings or company information on our platform does not imply endorsement, partnership, or affiliation. Listings may include publicly available roles from various sources, and companies shown may not have a direct relationship with Energy Hire.